The Nines

‘The Nines’ project is a mixed-use development Gravity designed for OPUS at the intersection of Elbow Drive and Southland Drive in Calgary’s Southwood community (just south of Haysboro). This six-storey project features 16,000 sqft of retail space facing the streets and 85 apartments above. We designed the retail space to be subdividable into three bays. The structure of the commercial ground level is concrete while the residential levels above are wood-framed. The primary cladding of this development is textured glass-fibre reinforced concrete panels set against the warmth of wood-toned metal siding. 

This proposed development is situated on a largely vacant lot beside the Southwood branch of the Calgary Public Library. Homes on the second to sixth-floor range in size from 470 to 1300 sqft and are available in one, two and three bedroom configurations. Every unit has a private balcony which are expressed as an egg-crate grid on the building facade. For the three-bedroom units, a larger balcony is separated into two zones with part accessible from the main bedroom and part from the living room. Parking for this development is provided by a single-level of underground parking, some surface parking, and secure bike storage on the main floor for residents. There are rooftop amenity spaces for both commercial and residential tenants.

One of the project challenges was burying an underground parkade within the limited depth available given the topographical slope from one corner of the site to the other. The goal was to achieve barrier free access from both streets and a welcoming streetscape for the main entry and the retail spaces along the public streets.

This project was submitted for development permit application in May of 2023. 

To learn more about this development, please visit OPUS’ website.

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Gravity's Hiring!

Gravity is currently hiring for a variety of roles across our Vancouver and Calgary offices, including a Construction Contract Administration Assistant position. The ideal candidate will be responsible for supporting our project managers and construction teams in the administration of construction contracts. This is a full-time position.

As a Construction Contract Administration Assistant, the successful candidate will be working closely supporting our Contract Administrators, Permits Coordinator and Principals. They would be involved in office administration and assist in the preparation of supplementary instructions, additional services agreements, certificates for payment, payment certification, letters of compliance, and other construction contract-related documents. They would prepare for construction startup meetings, take meeting minutes, and track and maintain project-related documents and records. They would also communicate effectively with both internal teams and external stakeholders. The candidate would become proficient with Gravity’s collaboration and filing systems so as to effectively organize all project documents, information and correspondence. Further, the candidate would assist with the development and building permit coordination.

To learn more about additional roles we are currently hiring for, please visit our careers page.

Gravity Welcomes New Architectural Technologist Nadia

We are excited to share that Nadia Music has joined Gravity. Nadia joined the Gravity team as an Architectural Technologist right after completing their diploma in Architecture Technology from the Southern Alberta Institute of Technology (SAIT) in 2022.

Having a fascination for building design and construction from a young age, Nadia spent countless hours sketching and creating their own dream homes. This passion led them to pursue a career in the field, where their dedication and enthusiasm has served them well. What sets them apart is their unique and creative flair, as well as their passion for art. Their education, experience, and innate talent bring a fresh perspective to their work, which is evident in everything they do. Their passion for the field is evident, and they are already proving to be a valuable addition to the Gravity team.

Welcome Nadia!

Shaganappi Multi DP Submitted!

Shaganappi Multi is a 99-home project with high visibility from Bow Trail SW, close proximity to Shaganappi Point LRT Station, and views to the Shaganappi Point Golf Course. The building form is configured as a ‘C’ to fill the site and maximize the number of units along the perimeter of a double-loaded corridor. Its industrial cladding materials respond to the high vehicular traffic flowing past this site while warmer wood tones respond to human-scaled balconies.

Unit identity, facade articulation, and balcony privacy are achieved through a pixelated three-dimensional composition integral to the architectural massing. This hyperarticulation responds to privacy adjacencies; smaller balconies with less glazing are located higher and positioned to reduce overlook into neighbours’ yards.

This articulation also facilitates porosity around building edges to enhance visibility on a corner site. Oversized balconies span the width of entire unit faces to convey porosity and reduce the perception of the building’s six-storey visual mass and roofline. Outdoor amenity spaces and landscaping are situated to provide enjoyment for the residents while also acting as a buffer to adjacent residences.

This development has been submitted for its development permit, and construction is expected to start later in the year.

You can find out more on our project page or on Calgary’s DMAP page.

Gravity's Hiring!

We’re hiring! With many current and upcoming projects, we are looking for an Intermediate or Senior Architectural Technologist located in both Calgary and Kelowna. Fluency in Autodesk Revit is a critical requirement for these roles. This position offers the candidate the opportunity to grow their careers with Gravity and further develop their skill set in their discipline.

Intermediate or Senior Architectural Technologist

Calgary - On-Site Position

Posted: March 29, 2023

Gravity has been transitioning from a small boutique residential design firm into a full-service, multi-office architecture firm. With larger and more complex projects, we are in need of a team player to who will extend our great reputation for high-quality work while maintaining our positive working environment. We are currently searching for an Intermediate or Senior Architectural Technologist that has residential and commercial project drafting and detailing experience for our Calgary office. This is a full-time position.

As an Intermediate or Senior Architectural Technologist, the successful candidate will be working on construction documents for a wide array of commercial, residential and mixed-use architecture projects. The technologist will be working on a variety of projects, interacting with clients, vendors and Gravity’s technical team working in Revit. He or she will be set into an excellent position of growing within this expanding firm.

The successful candidate will have a diploma in architectural technology and is familiar with both the building Codes in Alberta and BC. This person will have a minimum of 5 years of experience as a technologist. The technologist will also need to have meaningful experience with Revit and understand how to leverage BIM for accuracy and efficiency. Gravity is a firm that is always interested in individuals that have experience working on a variety of projects, but having a passion for residential design and detailing is crucial. These are the minimal requirements for this position, with all other experience being advantages for the successful candidate.

An excellent opportunity awaits the successful candidate, including a competitive salary, health and dental benefits, and opportunities for growth within the company. If you believe that this could be a perfect fit for you, please send your resume immediately, or if you know the perfect person for this position then feel free to forward this information. All applications will be kept in the strictest of confidence.

Senior Architectural Technologist

Kamloops/Kelowna Region - On-Site
Though this is a remote position, candidates must be physically located near (or between) Kamloops or Kelowna in British Columbia for consideration.

Posted: February 1, 2023

Gravity has been transitioning from a small boutique residential design firm into a full-service, multi-office architecture firm. With larger and more complex projects, we are in need of a team player who will extend our great reputation for high quality work while maintaining our positive working environment. We are currently searching for a Senior Architectural Technologist who has extensive drafting and detailing experience for this position in central BC.

As a Senior Architectural Technologist, the successful candidate will be working on construction documents for a wide array of commercial, residential and mixed-use architecture projects. The technologist will be working on projects in both BC and Alberta, interacting with clients, vendors and Gravity’s technical team working in Revit. Part of this role also includes support with contract/constuction administration. This includes supporting Gravity’s Calgary-based Contract Administrator by helping deliver construction phase services, including conducting field reviews, preparing field reports, and responding to requests for additional information. Liaising between clients’ construction staff, planners, AHJs, consultants, and other Gravity staff and Principals will also be also required.

As the number of Gravity’s projects increase in the area, so does the potential for growing a career within our expanding firm.

The successful candidate will have a diploma in architectural technology, and is very familiar with both the British Columbia Building Code and the Kelowna Zoning Bylaws. This person will have a minimum of 10 years of experience as a technologist. The candidate will also have meaningful experience with Revit and understand how to leverage BIM for accuracy and efficiency. Gravity is a firm that is always interested in individuals that have experience working on a variety of projects, but having a passion for wood-frame design and detailing is crucial. These are the minimal requirements for this position, with all other experience being advantages for the successful candidate.

An excellent opportunity awaits the successful candidate, including a competitive base salary, and opportunities for growth within the company. If you believe that this could be a perfect fit for you, please send your resume immediately, or if you know the perfect person for this position then feel free to forward this correspondence. All applications will be kept in the strictest of confidence.

Mission Flats Construction Update

Mission Flats is a five-storey residential development Gravity designed for NAI Advent. Trimount, the contractor, is more than halfway through framing, and we are looking forward to the building taking its final form soon.

The building contains 67 residential units, including 11 garden suites, above a two-storey underground parkade. Parking is accessed from the lane to ensure an uninterrupted pedestrian environment along the stately, tree-lined street the building faces. This apartment-style condominium building was designed to fit in with the neighbouring modernist brick apartment blocks by borrowing both their brick materiality and symmetrical aesthetic. In a more traditional gesture, the roof playfully floats over the top floor.

We recently commissioned local architectural photographer Bryce Baker to take some aerial images of this development during construction. The images turned out very well, and we are very excited to share them here!

Learn more about this project.

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Queen Mary Multi-Storey

Queen Mary Apartments is a proposed four-storey multi-family building featuring 43 homes which Gravity has designed for Lubec Construction Limited. Situated in Queen Mary Park, this centrally located development is near downtown Edmonton and the North Saskatchewan river valley. 

Proposing a modest relaxation of the front setback allowed us to situate the development in closer proximity to the street, making the building more engaging to passersby and residents alike. This also allowed the units to widen from studios to true one and two-bedroom homes. Prioritizing this feature when designing the building was necessary, as a smaller front setback ensured housing density was not sacrificed in the development. 

This development required a different approach to unit design due to the east/west orientation of the parcel. By turning the double-loaded corridor to run perpendicular to the street, we were able to increase the number of units with south-facing balconies and great natural lighting.

This development has one and two-bedroom homes each ranging from 470 to 800 square feet in size. The building is finished with Ceraclad, wood-toned metal panels, and flat metal panels. 

This project features surface parking for tenants (some of it covered), with additional bicycle parking and bicycle storage. This amenity along with the central location may encourage residents and visitors to be less reliant on their vehicles as a primary mode of transportation. 

This parcel has been submitted for DP review and is anticipated to start construction in 2023. Learn more about this project.

Livingston Rowhouses

We are excited to announce a new rowhouse development in collaboration with Daytona Homes. Livingston Rowhouses is a two-building project in the community of Livingston in north Calgary. This Daytona Homes development features ten, three-storey townhomes, each with a secondary suite on the ground level.

Daytona gave special consideration to the changing real estate market and asked our team to design these homes as two-bedroom rowhouses with a lower single-bedroom unit accessible from a separate entrance. This allows the homeowners to rent out the secondary suite as a mortgage helper. Both the primary two-bedroom home and the single-bedroom home have amenity spaces at the rear of the homes, with a patio at grade and a deck on the first level of the primary dwellings. Parking is provided off of the rear lane, with the end units having garages and the middle units have parking pads. The primary units range in size from 1530–1675 square feet, with 520–589 square feet in the secondary suites. 

These rowhouses are wood-framed and clad with a mix of vertical and horizontal vinyl siding. Recessed brick walls signal the entrances. Our designers were inspired by Prairie Style architecture, though the overall massing is modern.

We are currently awaiting development permit approval, and construction is expected to commence in 2023. Learn more about this project.

Wedderburn Rowgalows DP Submitted

Wedderburn in Okotoks is a 5-building, 22-home rowhouse project that Gravity designed for Partners Development Group.

Wedderburn Rowgalows Site Plan for Building A

Typically, when you think of row houses, you think of two-storey homes. Starting in D’arcy Ranch in Okotoks, Gravity developed a plan for a bungalow rowhouse configuration, as a smaller alternative to the traditional rowhouse, which we call a ‘rowgalow’!

Wedderburn combines traditional two-storey rowhouses with these one-storey rowgalows to create mixed rowhouse buildings.

While these plans were adapted from the ones we started in Okotoks, these lots are between 2 and 3 meters shallower, making the siting that much more challenging. One of the specific design challenges we had to overcome was a curved setback in front of Building A, which (after various attempts at sliding and crushing the standard plans) we solved with a unique unit layout.

These rowhouses have three bedrooms total, with a spacious floor plan. Homeowners also have the option to develop the basement to additional living space, and another bedroom below grade. The homes range in size from 950 to 970 square feet and are clad with lap siding, board and batten, and brick. Detached garages can be found at the back of the properties, all with the capacity for two vehicles. Visitor parking is available on the street. 

The development permit was submitted in September 2022, and construction is expected to start later this year. 

Gravity Welcomes New Marketing Coordinator Charlotte

Gravity is excited to announce Charlotte Aksenchuk has joined Gravity as our Marketing Coordinator.

Before she joined the team, she held marketing positions in various sectors. She chose a Bachelor of Arts in Communications and Media Studies from the University of Calgary. Throughout her final year and a half of her degree, Charlotte interned at Harvest Builders, a Calgary-based startup tech incubator. She learned and honed her marketing skills under a very experienced team. Since then, she has worked in environmental monitoring, tech, and the architecture industries. The skills she developed in these positions translated well into becoming the Marketing Coordinator for Gravity.

Charlotte moved to Vancouver in the middle of 2021 but continues to enjoy returning to Calgary to visit. She proudly remains a Calgary Flames fan and enjoys watching hockey games with her husband. On rainy days (which are very common now that she lives in Vancouver), she enjoys making breads, desserts, and elaborate meals. On not-so-rainy days, Charlotte can be found outside enjoying the fantastic views of mountains and oceans, or playing a round of golf with her husband!

Arrive Sage Aerials

Along with the amazing moving photos we recently received from Calgary-based filmmaker and architectural photographer Bryce Baker, we also commissioned him to shoot some aerial images of the Arrive at Sage Meadows development by Partners Development Group. These shots reveals how we 'unlocked' a rather odd-shaped site for through a thoughtful combination of units and building types, as well as multiple outdoor common amenity spaces. The measurable outcome was a total of 164 townhomes with four different unit types; but with parklets, playgrounds and a community garden, the sense of shared space and community in unquantifiable.

To learn more about this project, visit its project page.

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Mount Pleasant 8

Gravity recently commissioned Bryce Baker, a local architectural photographer to make photos of our award-winning eight-unit multi-residential development. Mount Pleasant 8 was commissioned by RNDSQR on a 30.47mx36.54m corner parcel with one of the first R-CG designations in the City at the time. BMP Construction Management completed the project in 2017.

Seven of the units are two-storey townhouses, and one—located above the garages—is a two-storey apartment. The townhouses all have basements with an additional bedroom. Nine parking stalls are provided on site, with eight garaged stalls, and one exterior visitor stall.

As a nod to tradition, each townhouse has a brick facade. This brick element stands proud of each unit, each of which is massed in the form of a vernacular house. The apartment takes a more contemporary shape, and is sculpted from three interlocking masses.

The townhouses each have their own private amenity space at the rear. Five of these back onto the common courtyard. The apartment unit has a second floor patio on top of the garage, and a third floor balcony off of one of its three bedrooms.

R-CG is a relatively new land use designation. It was developed by the City and other stakeholders to allow for low-density townhouse development in the existing low-density areas of Calgary's inner city. It shares a common street-oriented configuration where each unit has a door to the street and there are no units behind one another.

We hope you enjoy these images as much as we do. To learn more about this project, please visit its project page.

This project won the BILD Calgary Region SAM Awards in the category of Best New Design Villa/Duplex/Townhome 1,200 sq. ft. and over.

David Charlton Joins Gravity as an Architectural Technologist

We are excited to announce David Charlton as one of Gravity’s new Architectural Technologists!

David joined Gravity in the middle of 2022 as an Architectural Technologist. Originally from the Lower Mainland area of BC, David moved to Calgary in 2007 and received his BA in Political Science from the University of Calgary in 2014. He then worked in the insurance industry for a year and discovered it wasn’t for him. This decision led him to pursue a career in architecture by getting an Architectural Technologist diploma from the Southern Alberta Institute of Technology (SAIT) in 2018. 

David has always been fascinated by architecture and the process of how buildings are constructed. Combined with the idea of having a career that takes designs and makes them into real-world construction, the architecture industry appealed greatly to him.

Prior to joining Gravity, David was at Systemic Architecture Inc, where he worked on various commercial, mixed-use, and multi-family projects. Some of his previous work includes Basecamp Resorts, a resort chain that operates in various mountain towns of Alberta and B.C, and The Shops at Buffalo Run, a multi-building commercial development, in Tsuut'ina Nation, just outside of Calgary. His favourite style of architecture is West Coast Modernism and his favourite architect is Arthur Erikson.

When David is not at work, you can find him participating in a variety of sports, including hockey, hiking, snowboarding, and skateboarding. David also frequently takes his dog, Indiana, on hikes and walks, where he does photography for fun, mostly taking photos of architecture and nature.

We are excited to have David on our team!

Gravity's New Office Manager

We are pleased to announce Kayla Anez has joined Gravity as our Office Manager.

Kayla joined us in May 2022 and has over seven years of experience in the administrative field. Prior to joining Gravity, she had been an administrative assistant at three other architecture firms. Her experience in our field translates well into her current role as our new Office Manager. 

Kayla’s passion has always been to become an Office Manager. Her ability to wear many hats shows when she is able to take on a variety of tasks. She thrives in fast-paced, deadline-driven environments and prides herself on being able to handle everything and anything that comes across her desk. Kayla’s always eager to learn and provide assistance wherever she's needed. She firmly believes that TEAM stands for Together Everyone Achieves More, and she brings that philosophy to the office daily. 

You can find Kayla at the gym, hanging out with her husband, family and her two cats outside of work. She’s lived in Calgary since 2006, however, she is originally from Montreal so naturally, her favourite hockey team is the Montreal Canadiens. Kayla and her husband enjoy hiking together, and the mountains are still a novelty for her, even after 16 years. Moraine Lake holds a special place in her heart, as that is where her now husband proposed to her. 

We are excited to have Kayla on our team!